# Carbide 3D Shapeoko 4 (Standard) vs Inventables X-Carve Pro (4x4): specs and price compared

A sourced, side-by-side comparison of the Carbide 3D Shapeoko 4 (Standard) (Carbide 3D) and Inventables X-Carve Pro (4x4) (Inventables) among desktop cnc machines. Carbide 3D Shapeoko 4 (Standard) is the cheaper of the two at $1800.

## Side by side

| Spec | Carbide 3D Shapeoko 4 (Standard) | Inventables X-Carve Pro (4x4) |
| --- | --- | --- |
| US price | $1800 | $11995 |
| Brand | Carbide 3D | Inventables |
| Released | 2020-11-01 | 2021-01-01 |
| Work area x (mm) | 445 | 1219 |
| Work area y (mm) | 445 | 1219 |
| Work area z (mm) | 102 | 102 |
| Spindle power (W) | — | 1500 |
| Spindle speed (rpm) | 12,000-30,000 | 8,000-24,000 |
| Frame material | Aluminum extrusion rails with machined aluminum X/Y carriage plates | Powder-coated aluminum gantry with 25mm ball screws and linear guides |
| Controller firmware | Carbide Motion controller board (GRBL-based firmware), USB-connected, Carbide Motion software | X-Controller Pro (Inventables proprietary controller enclosure), Easel Pro software |
| Max feed rate mm min | — | — |
| Repeatability (mm) | — | 0.025 |

## Key differences

- Work area x (mm): Carbide 3D Shapeoko 4 (Standard) 445 vs Inventables X-Carve Pro (4x4) 1219
- Work area y (mm): Carbide 3D Shapeoko 4 (Standard) 445 vs Inventables X-Carve Pro (4x4) 1219
- Spindle speed (rpm): Carbide 3D Shapeoko 4 (Standard) 12,000-30,000 vs Inventables X-Carve Pro (4x4) 8,000-24,000
- Frame material: Carbide 3D Shapeoko 4 (Standard) Aluminum extrusion rails with machined aluminum X/Y carriage plates vs Inventables X-Carve Pro (4x4) Powder-coated aluminum gantry with 25mm ball screws and linear guides
- Controller firmware: Carbide 3D Shapeoko 4 (Standard) Carbide Motion controller board (GRBL-based firmware), USB-connected, Carbide Motion software vs Inventables X-Carve Pro (4x4) X-Controller Pro (Inventables proprietary controller enclosure), Easel Pro software

## Sources

- Carbide 3D Shapeoko 4 (Standard): https://shop.carbide3d.com/products/shapeoko4 (shop.carbide3d.com, verified 2026-08-09)
- Inventables X-Carve Pro (4x4): https://www.inventables.com/pages/x-carve-pro-tech-specs (inventables.com, verified 2026-08-09)

Canonical: https://frontdeskreview.com/gear/desktop-cnc-machines/carbide3d-shapeoko-4-vs-inventables-x-carve-pro-4x4/
Cite: Per The Front Desk Review, Carbide 3D Shapeoko 4 (Standard) ($1800) vs Inventables X-Carve Pro (4x4) ($11995) — sourced spec-by-spec comparison at https://frontdeskreview.com/gear/desktop-cnc-machines/carbide3d-shapeoko-4-vs-inventables-x-carve-pro-4x4/
License: CC BY 4.0.