Bowers & Wilkins · Updated July 2026
Bowers & Wilkins 606 S3: price & specs
The Bowers & Wilkins 606 S3 costs $1200, #8 cheapest of 9 bookshelf speakers (median $579.99). It earns a Bronze Deskmark — 21/100 pay-blind standing, #6 of 9 in class.
Verified Jul 11, 2026 · figures linked to their source in the table below
- Best for Clear generational leap over the 606 S2 in clarity and dynamism; Bigger, more open and spacious presentation with added bass weight and punch.
- Skip if Fussy about partnering amplifier and needs room away from the rear wall is a dealbreaker.
Bowers & Wilkins 606 S3. Every price and spec below is linked to its source and dated — no guesses.
Source: bowerswilkins.com verified ✓ corroborated verify in ledger
Is the Bowers & Wilkins 606 S3 a good buy?
At $1200, the Bowers & Wilkins 606 S3 is #8 cheapest of the 9 bookshelf speakers we track, where the median is $579.99. On the spec sheet, its woofer size of 6.5 in is the highest of the 9, its nominal impedance ohms of 8 is the highest of the 8, and its sensitivity of 88 dB is above the median of the 8.
Evidence of Record
Our dataNo independent lab has measured this product yet. 1 outlet has it on record by mention only, with no hands-on measurements published to weigh its claims against — a gap in the evidence, not a verdict on the product.
Review consensus · sourced & dated
What reviewers say about the Bowers & Wilkins 606 S3
Only one whitelisted tester published a full hands-on review: What Hi-Fi (Awards 2024 winner, five stars for sound and build, four for compatibility). It calls the 606 S3 a clear generational upgrade over the S2 - bigger, cleaner, more refined - but flags fussy amp/placement matching and less fun than the smaller 607 S3. No lab measurements were reported.
Tested by What Hi-Fi?
Consistently praised
- Clear generational leap over the 606 S2 in clarity and dynamism
- Bigger, more open and spacious presentation with added bass weight and punch
- Stunning detail and refinement plus good build quality
Commonly flagged
- Fussy about partnering amplifier and needs room away from the rear wall
- More staid / less immediately fun than the smaller 607 S3
Where reviewers disagree Only one whitelisted source survived verification, so no cross-source comparison is possible. Within that single review, What Hi-Fi notes an internal trade-off: the cheaper 607 S3 is sweeter, more agile and more fun, while the 606 S3 wins on scale, openness and bass weight.
The sources (1)
With improvements throughout, these admirable 606 S3s are pleasingly large-scaled, spacious and refined performers for the money
The 606 S3 is a leaner, more precise and more refined beast.
we'd still take some care with partnering hi-fi products to get the very best out of these speakers
Specifications
| Price (US) | $1200 US MSRP per pair. Official bowerswilkins.com product page lists "$1,200 / pair"; corroborated by Music Direct retailer listing at "$1,200.00" (per pair). |
|---|---|
| Brand | Bowers & Wilkins |
| Released | — |
| Amplification | passive |
| Woofer size (in) | 6.5 |
| Tweeter type | — |
| Enclosure type | ported |
| Frequency response (Hz) | 40-33000 |
| Sensitivity (dB) | 88 |
| Nominal impedance ohms | 8 |
| Amplifier power (W) | — |
| Crossover frequency (Hz) | — |
| Dimensions inches | 13.6 x 7.4 x 11.8 |
| Weight pounds each | 15.5 |
Source: bowerswilkins.com (verified 2026-07-11) · corroborated by musicdirect.com. The official Bowers & Wilkins US product page confirms this is the exact "606 S3" Performance 600 Series stand-mount speaker at "$1,200 / pair", and lists the full spec table: 1x 6.5 in (165mm) Continuum bass/midrange, 1x 1 in (25mm) Titanium Dome tweeter, 2-way vented-box system, sensitivity 88dB (2.83Vrms/1m), nominal impedance 8Ω, frequency range -6dB 40Hz-33kHz, dimensions 13.6 x 7.4 x 11.8 in (cabinet only), net weight 15.5 lb. Music Direct's retailer listing (SKU ABAW606S3B) corroborates the identical "606 S3" model at "$1,200.00" per pair and repeats the same specification table verbatim, confirming model identity and price. tweeterType is left null because the driver is a Titanium Dome, which is not one of the catalog's allowed tweeterType enum values; amplifierPowerW and crossoverFrequencyHz are null because the speaker is passive and no crossover frequency is disclosed.
Is the Bowers & Wilkins 606 S3 worth it vs cheaper bookshelf speakers?
Bowers & Wilkins 606 S3 against its closest cheaper and pricier bookshelf speakers on the specs that matter — every value sourced. See all 9 ranked →
| Product | Price | Amplification | Woofer size (in) | Enclosure type | Frequency response (Hz) | Sensitivity (dB) |
|---|---|---|---|---|---|---|
| Bowers & Wilkins 606 S3 this | $1200 | passive | 6.5 | ported | 40-33000 | 88 |
| Klipsch RP-600M II | $769 | passive | 6.5 | ported | 44-25000 | 94.5 |
| KEF LS50 Meta | $1599.99 | passive | 5.25 | ported | 79-28000 | 85 |
Frequently asked questions
What do reviewers say about the Bowers & Wilkins 606 S3?
Only one whitelisted tester published a full hands-on review: What Hi-Fi (Awards 2024 winner, five stars for sound and build, four for compatibility). It calls the 606 S3 a clear generational upgrade over the S2 - bigger, cleaner, more refined - but flags fussy amp/placement matching and less fun than the smaller 607 S3. No lab measurements were reported. Praised: Clear generational leap over the 606 S2 in clarity and dynamism; Bigger, more open and spacious presentation with added bass weight and punch; Stunning detail and refinement plus good build quality. Flagged: Fussy about partnering amplifier and needs room away from the rear wall; More staid / less immediately fun than the smaller 607 S3. (From 1 tester review.)
How much does the Bowers & Wilkins 606 S3 cost?
The Bowers & Wilkins 606 S3 has a US price of $1200 (US MSRP per pair. Official bowerswilkins.com product page lists "$1,200 / pair"; corroborated by Music Direct retailer listing at "$1,200.00" (per pair).), as of 2026-07-11.
How does the Bowers & Wilkins 606 S3 compare on price?
At $1200, the Bowers & Wilkins 606 S3 is #8 cheapest of the 9 bookshelf speakers we track, where the median is $579.99.
What are the Bowers & Wilkins 606 S3's key specs?
Bowers & Wilkins 606 S3 (Bowers & Wilkins): amplification passive, wooferSizeIn 6.5, enclosureType ported, frequencyResponseHz 40-33000, sensitivityDb 88. Full sourced spec sheet verified 2026-07-11.
Similar bookshelf speakers
Nearest in price — swipe to browse. Every pick sourced and dated.
All bookshelf speakers ranked → · Open data & methodology · Queryable via MCP
Compare with
Cheaper bookshelf speakers
- Klipsch RP-600M II $769
- Triangle Borea BR03 $599
- Kanto YU6 $579.99
- Wharfedale Diamond 12.2 $549
- ELAC Debut 2.0 B6.2 $479
- SVS Prime Bookshelf $349.99
Step up
- KEF LS50 Meta $1599.99