REP Fitness · Updated June 2026

REP Fitness PR-5000 V2 Power Rack: price & specs

REP Fitness PR-5000 V2 Power Rack. Every price and spec below is linked to its source and dated — no guesses.

Source: repfitness.com verified ✓ corroborated verify in ledger

BronzeDeskmark18/100#7 of 9 in class

The REP Fitness PR-5000 V2 Power Rack is listed at $1499.99 on repfitness.com as of 2026-06-27, #11 cheapest of 12 power racks (median $870); other retailers may be lower. It earns a Bronze Deskmark — 18/100 pay-blind standing, #7 of 9 in class.

Verified Jun 27, 2026 · figures linked to their source in the table below

Cheapest power racks: Fringe Sport Garage Series Squat Cage — $349

See REP Fitness PR-5000 V2 Power Rack on Amazon Live price at the store — may differ from the dated listed price above. As an Amazon Associate we earn from qualifying purchases.
REP Fitness PR-5000 V2 Power Rack — REP Fitness
Image: repfitness.com (© REP Fitness)

Is the REP Fitness PR-5000 V2 Power Rack a good buy?

At $1500, the REP Fitness PR-5000 V2 Power Rack is #11 cheapest of the 12 power racks we track, where the median is $885. On the spec sheet, its steel gauge of 11 is the lowest of the 12, and its weight capacity of 1000 lb is at the median of the 9.

Evidence of Record

Our data
Independent labsmeasured it
1
Physical metricsrecorded
1
Outlets on record1 tested · 1 mention-only
2

One independent lab measured this product across 1 physical metric — setup. These numbers rest on a single hands-on source so far; 1 other outlet has it on record by mention only.

A coverage record, not a rating. How we count

Review consensus · sourced & dated

What reviewers say about the REP Fitness PR-5000 V2 Power Rack

Two whitelisted outlets reviewed this rack hands-on. Garage Gym Reviews (Coop Mitchell) covers the exact PR-5000 V2, used it for all his usual lifts, tested accessories, and scored it 4.5/5. BarBend tested the current PR-5000 and clocked a ~8-hour solo assembly. Both call it one of the best value high-end power racks — overbuilt 3x3 11-gauge steel, 1,000 lb capacity, deep customization. Neither ran lab strength benchmarks. Non-whitelist blogs were excluded.

Based on 2 reviews · 2 lab-tested · 2023-06-20–2024-11-27

Tested by Garage Gym Reviews, BarBend

Consistently praised

  • Excellent value — high-end quality at a notably lower price than premium competitors · 2 sources
  • Overbuilt 3x3 11-gauge steel with a 1,000 lb weight capacity; built to last a lifetime · 2 sources
  • Deep customization: multiple heights, depths and colors plus a large lineup of attachments and add-ons · 2 sources
  • Laser-cut numbers on the uprights make swapping J-cups and attachments easy · 2 sources

Commonly flagged

  • Expensive — even the bare rack starts over $1,000 · 2 sources
  • Attachments/accessories do not match the quality of the rack itself
  • Top crossmember does not sit flush with the uprights
  • Very heavy to move once assembled; solo assembly took ~8 hours

Where reviewers disagree No real conflict — both rate it highly. GGR (Coop Mitchell) is more critical of finish details and accessory quality (non-flush crossmember, more textured powder coat, no black-zinc hardware option); BarBend is broadly positive and flags mainly price and the rack's weight/long solo assembly. Note BarBend's page does not badge the rack 'V2' and does not name Rogue Monster or Sorinex, though it covers the current PR-5000; the Rogue Monster / Sorinex XL rivalry framing comes only from GGR.

The sources (2)

Garage Gym Reviews lab-tested ·

This is one of the best power racks on the market.
Some accessories aren’t as high-quality as the rack itself
Top crossmembers don’t sit flush with the uprights

BarBend lab-tested ·

Assembly time (one person): ~8 hours

This tank of a power rack can support up to 1,000 pounds of weight, and features uprights forged from 11-gauge steel.
it took one of our team members around eight hours to assemble it by himself.
the lowest price tag will still be over $1,000, which might be steep for some.

Specifications

Price (US)$1499.99 'Starting at $1,499.99' on live repfitness.com PR-5000 rack builder (configurable)
BrandREP Fitness
Released
Typepower_rack
Height (in)80, 93, or 100 in
Steel gauge11
Upright size (in)3x3 in
Hole spacingstandard 2 in (1 in holes)
Weight capacity (lb)1000
Footprint (in)50.5 in wide, depth 30 or 41 in (4-post)
Attachments includedJ-cups, pin-pipe safeties, pull-up bar (configurable)

Source: repfitness.com (verified 2026-06-19) · corroborated by garagegymlab.com. Re-verified 2026-06-19: live repfitness.com PR-5000 rack builder shows 'Starting at $1,499.99'. Draft's $899.99 was wrong. 11-gauge 3x3 steel, 2-inch hole spacing (1-inch holes), 1,000 lb capacity confirmed. Heights corrected to 80/93/100 in (current V2 adds 100 in option) per Garage Gym Lab release coverage. Removed the unverified 'metric 75mm' note. Source URL changed from the comparison guide to the live rack-builder product page (authoritative for price).

Is the REP Fitness PR-5000 V2 Power Rack worth it vs cheaper power racks?

REP Fitness PR-5000 V2 Power Rack against its closest cheaper and pricier power racks on the specs that matter — every value sourced. See all 12 ranked

ProductPriceTypeHeight (in)Steel gaugeUpright size (in)Hole spacing
REP Fitness PR-5000 V2 Power Rack this$1499.99power_rack80, 93, or 100 in113x3 instandard 2 in (1 in holes)
REP Fitness PR-4000 Power Rack$1249power_rack80 or 93 in113x3 inwestside (1 in bench zone, 2 in elsewhere)
Sorinex XL Series Power Rack$3149power_rack95.4 in113x3 in4-way hole system (1 in holes)

Frequently asked questions

What do reviewers say about the REP Fitness PR-5000 V2 Power Rack?

Two whitelisted outlets reviewed this rack hands-on. Garage Gym Reviews (Coop Mitchell) covers the exact PR-5000 V2, used it for all his usual lifts, tested accessories, and scored it 4.5/5. BarBend tested the current PR-5000 and clocked a ~8-hour solo assembly. Both call it one of the best value high-end power racks — overbuilt 3x3 11-gauge steel, 1,000 lb capacity, deep customization. Neither ran lab strength benchmarks. Non-whitelist blogs were excluded. Praised: Excellent value — high-end quality at a notably lower price than premium competitors; Overbuilt 3x3 11-gauge steel with a 1,000 lb weight capacity; built to last a lifetime; Deep customization: multiple heights, depths and colors plus a large lineup of attachments and add-ons; Laser-cut numbers on the uprights make swapping J-cups and attachments easy. Flagged: Attachments/accessories do not match the quality of the rack itself; Expensive — even the bare rack starts over $1,000; Top crossmember does not sit flush with the uprights; Very heavy to move once assembled; solo assembly took ~8 hours. (From 2 tester reviews, 2 lab-tested.)

How much does the REP Fitness PR-5000 V2 Power Rack cost?

The REP Fitness PR-5000 V2 Power Rack has a US price of $1499.99 ('Starting at $1,499.99' on live repfitness.com PR-5000 rack builder (configurable)), as of 2026-06-19.

How does the REP Fitness PR-5000 V2 Power Rack compare on price?

At $1500, the REP Fitness PR-5000 V2 Power Rack is #11 cheapest of the 12 power racks we track, where the median is $885.

What are the REP Fitness PR-5000 V2 Power Rack's key specs?

REP Fitness PR-5000 V2 Power Rack (REP Fitness): type power_rack, height in 80, 93, or 100 in, steel gauge 11, upright size in 3x3 in, hole spacing standard 2 in (1 in holes). Full sourced spec sheet verified 2026-06-19.

Price of record: $1499.99 at repfitness.com, 2026-06-27. Other retailers may be lower — check the current price:

See REP Fitness PR-5000 V2 Power Rack on Amazon As an Amazon Associate we earn from qualifying purchases.

Similar power racks

Nearest in price — swipe to browse. Every pick sourced and dated.

All power racks ranked · Open data & methodology · Queryable via MCP

Compare with

Part of the Home gym cluster

Cardio, strength and recovery, compared. Same sourcing, same dated prices: