Grizzly · Updated July 2026
Grizzly G0505: full specs
Grizzly G0505. Every price and spec below is linked to its source and dated — no guesses.
Source: support.grizzly.com verified STALE · 2026-07-13 ✓ corroborated verify in ledger
The Grizzly G0505 has no US price of record yet. It earns a Silver Deskmark — 48/100 pay-blind standing, #4 of 8 in class.
Verified Jul 13, 2026 · figures linked to their source in the table below
Is the Grizzly G0505 a good buy?
On the spec sheet, its cutterhead speed of 10000 rpm is the highest of the 7, its feed rate of 32 fpm is the highest of the 6, and its feed speeds of 1 is the lowest of the 4.
Specifications
| Price (US) | Not published No official US MSRP could be sourced for this discontinued model — Grizzly's own product page (grizzly.com/products/.../g0505), Home Depot, and Lowes all blocked access. The only live prices found were divergent discontinued-stock reseller figures: $682.80 at US Tool Depot (the corroborating page) and $564.95 at WoodArtSupply. No price is listed because no representative/typical price could be honestly sourced. |
|---|---|
| Brand | Grizzly |
| Released | — |
| Max width inches | — |
| Max thickness inches | 6 |
| Max depth of cut inches | — |
| Cutterhead type | straight-knife |
| Cutterhead speed (rpm) | 10000 |
| Feed rate (fpm) | 32 |
| Feed speeds | 1 |
| Motor amps | 15 |
| Dust port diameter inches | — |
| Weight pounds | — |
Source: support.grizzly.com (read 2026-07-13) STALE · 2026-07-13 · corroborated by ustooldepot.com (read 2026-07-13).
How we checked
The official Grizzly support FAQ for the G0505 12-1/2" 2 HP Benchtop Planer (discontinued) confirmed the exact model identity — it even contrasts the G0505 against its sibling G0790 13" planer — and stated most specs verbatim: max cut width 12-1/2", max cut height 6", full-width depth of cut 1/16" (distinct from the 3/32" narrow-board figure), cutterhead of 2 HSS reversible knives at 10,000 RPM, 32 FPM feed rate, 15A full-load current at 110V, and explicitly "no dust ports." The US Tool Depot retailer listing (UPC 690550005053) corroborated the same model and figures (12-1/2" width, 6" height, 10,000 RPM, 32 FPM, 2 HP/110V/15A). No official MSRP was retrievable — Grizzly's product page and Home Depot/Lowes returned HTTP 403 — and the only prices found were divergent discontinued-stock reseller figures ($682.80 US Tool Depot, $564.95 WoodArtSupply), so the price is left blank; bare-tool weight was not stated on any fetched page (only a 78 lb shipping weight), so weight pounds is left blank.
Frequently asked questions
How much does the Grizzly G0505 cost?
The Grizzly G0505 has no US price of record as of 2026-07-13.
What are the Grizzly G0505's key specs?
Grizzly G0505 (Grizzly): Max thickness inches 6, Cutterhead type straight-knife, Cutterhead speed (rpm) 10000, Feed rate (fpm) 32, Feed speeds 1. Full sourced spec sheet verified 2026-07-13.
Similar thickness planers
Nearest in price — swipe to browse. Every pick sourced and dated.
All thickness planers ranked · Open data & methodology · Queryable via MCP