Anycubic
Anycubic Kobra 3
$349Cheaper
Released 2024-05
Best 3D Printers · head-to-head
Anycubic Kobra 3 vs Sovol SV08
A sourced, side-by-side comparison. Anycubic Kobra 3 is cheaper at $349. Every spec and price links to its source.
Sovol
Sovol SV08
$549
Released 2024
Which is better: the Anycubic Kobra 3 or Sovol SV08?
On the specs we track, they're closely matched. The Anycubic Kobra 3 is the cheaper at $349.
As an Amazon Associate we earn from qualifying purchases. Prices verified at capture; live price may differ.
Full spec sheet
✓ marks the stronger figure where "more" — or "less", for price and weight — is unambiguously better.
| Spec | Anycubic Kobra 3 | Sovol SV08 |
|---|---|---|
| US price | $349 | $549 |
| Brand | Anycubic | Sovol |
| Released | 2024-05 | 2024 |
| Technology | FDM | FDM |
| Build volume (mm) | 250 x 250 x 260 mm | 350 x 350 x 345 mm |
| Max speed mms | 600 | 700 |
| Auto leveling | Yes | Yes |
| Multicolor | No | No |
| Enclosed | No | No |
| Max hotend temp c | 300 | 300 |
| Release year | 2024 | 2024 |
Sources — Anycubic Kobra 3: store.anycubic.com (verified 2026-06-27). Sovol SV08: sovol3d.com (verified 2026-06-27).
What's the difference between the Anycubic Kobra 3 and Sovol SV08?
Where the two actually differ on the specs we track (2 of 7). Matching specs are omitted.
- Build volume (mm): Anycubic Kobra 3 250 x 250 x 260 mm vs Sovol SV08 350 x 350 x 345 mm
- Max speed mms: Anycubic Kobra 3 600 vs Sovol SV08 700
What reviewers say
Sourced tester consensus for each — the "what people who used it think" layer, not just specs.
Anycubic Kobra 3
Two whitelisted testers hands-on tested this exact model. Both praise fast speeds, excellent single-filament print quality, the ACE Pro four-color box that doubles as a filament dryer, and quick ~10-20 minute setup. They split on the verdict: TechRadar calls it near the best bed-slinger and scores it 4.5/5, while Tom's Hardware faults heavy filament-purge waste and a half-baked slicer and keeps it off its best-3D-printers list. No PCMag or Wired coverage found. (2 sourced reviews, 2 lab-tested.)
Praised: Fast print speeds; Excellent single-filament print quality; ACE Pro four-color system doubles as a filament dryer.
Flagged: Wasteful filament purge / waste pile during color swaps; Half-baked Anycubic slicer with no purge tuning or Orca support; Multifilament printing is noticeably slow.
Sovol SV08
Only one whitelisted tester, Tom's Hardware, hands-on reviewed the exact Sovol SV08 (the larger SV08 Max is a separate model, excluded). It praises the Voron-2.4-style Core XY as fast, open-source and great value, setting a 13:25 speed-Benchy record, but flags a weak-grip PEI bed and conservative default slicer settings needing tuning. (1 sourced review, 1 lab-tested.)
Praised: Voron-2.4-style open-frame Core XY with pure Klipper firmware, fully open-source and no cloud required; Blazing speed, topping Tom's Hardware's fastest-3D-printer list with a 13 min 25 sec speed Benchy; Large 350 x 350 mm build volume and roughly one-hour assembly versus days for a scratch-built Voron; strong value under $600.
Flagged: PEI bed not sticky enough for high-speed prints; needed a glue stick; Conservative/lacking manufacturer default slicer settings caused over-extrusion and heavy TPU stringing, requiring tuning; Basic, old-fashioned text-based screen.