Carbide 3D
Carbide 3D Shapeoko 4 (Standard)
$1800Cheaper
Released 2020-11-01
Best Desktop Cnc Machines · head-to-head
Carbide 3D Shapeoko 4 (Standard) vs Inventables X-Carve Pro (4x4)
A sourced, side-by-side comparison. Carbide 3D Shapeoko 4 (Standard) is cheaper at $1800. Every spec and price links to its source.
Inventables
Inventables X-Carve Pro (4x4)
$11995
Released 2021-01-01
Which is better: the Carbide 3D Shapeoko 4 (Standard) or Inventables X-Carve Pro (4x4)?
On the specs we track, they're closely matched. The Carbide 3D Shapeoko 4 (Standard) is the cheaper at $1800.
As an Amazon Associate we earn from qualifying purchases. Prices verified at capture; live price may differ.
Full spec sheet
✓ marks the stronger figure where "more" — or "less", for price and weight — is unambiguously better.
| Spec | Carbide 3D Shapeoko 4 (Standard) | Inventables X-Carve Pro (4x4) |
|---|---|---|
| US price | $1800 | $11995 |
| Brand | Carbide 3D | Inventables |
| Released | 2020-11-01 | 2021-01-01 |
| Work area x (mm) | 445 | 1219 |
| Work area y (mm) | 445 | 1219 |
| Work area z (mm) | 102 | 102 |
| Spindle power (W) | — | 1500 |
| Spindle speed (rpm) | 12,000-30,000 | 8,000-24,000 |
| Frame material | Aluminum extrusion rails with machined aluminum X/Y carriage plates | Powder-coated aluminum gantry with 25mm ball screws and linear guides |
| Controller firmware | Carbide Motion controller board (GRBL-based firmware), USB-connected, Carbide Motion software | X-Controller Pro (Inventables proprietary controller enclosure), Easel Pro software |
| Max feed rate mm min | — | — |
| Repeatability (mm) | — | 0.025 |
Sources — Carbide 3D Shapeoko 4 (Standard): shop.carbide3d.com (verified 2026-08-09). Inventables X-Carve Pro (4x4): inventables.com (verified 2026-08-09).
What's the difference between the Carbide 3D Shapeoko 4 (Standard) and Inventables X-Carve Pro (4x4)?
Where the two actually differ on the specs we track (5 of 9). Matching specs are omitted.
- Work area x (mm): Carbide 3D Shapeoko 4 (Standard) 445 vs Inventables X-Carve Pro (4x4) 1219
- Work area y (mm): Carbide 3D Shapeoko 4 (Standard) 445 vs Inventables X-Carve Pro (4x4) 1219
- Spindle speed (rpm): Carbide 3D Shapeoko 4 (Standard) 12,000-30,000 vs Inventables X-Carve Pro (4x4) 8,000-24,000
- Frame material: Carbide 3D Shapeoko 4 (Standard) Aluminum extrusion rails with machined aluminum X/Y carriage plates vs Inventables X-Carve Pro (4x4) Powder-coated aluminum gantry with 25mm ball screws and linear guides
- Controller firmware: Carbide 3D Shapeoko 4 (Standard) Carbide Motion controller board (GRBL-based firmware), USB-connected, Carbide Motion software vs Inventables X-Carve Pro (4x4) X-Controller Pro (Inventables proprietary controller enclosure), Easel Pro software