Carbide 3D · Updated August 2026
Carbide 3D Shapeoko 4 (Standard): price, specs & release date
Carbide 3D Shapeoko 4 (Standard), released 2020-11-01. Every price and spec below is linked to its source and dated — no guesses.
Source: shop.carbide3d.com verified verify in ledger
Is the Carbide 3D Shapeoko 4 (Standard) a good buy?
At $1800, the Carbide 3D Shapeoko 4 (Standard) is #6 cheapest of the 11 desktop cnc machines we track, where the median is $1800. On the spec sheet, its work area x of 445 mm is below the median of the 12, its work area y of 445 mm is below the median of the 12, and its work area z of 102 mm is at the median of the 11.
Specifications
| Price (US) | $1800 Current price on shop.carbide3d.com for the Standard config bundled with the Carbide Compact Router; XL ($2,150) and XXL ($2,400) variants cost more for larger work areas. |
|---|---|
| Brand | Carbide 3D |
| Released | 2020-11-01 |
| Work area x (mm) | 445 |
| Work area y (mm) | 445 |
| Work area z (mm) | 102 |
| Spindle power (W) | — |
| Spindle speed (rpm) | 12,000-30,000 |
| Frame material | Aluminum extrusion rails with machined aluminum X/Y carriage plates |
| Controller firmware | Carbide Motion controller board (GRBL-based firmware), USB-connected, Carbide Motion software |
| Max feed rate mm min | — |
| Repeatability (mm) | — |
Source: shop.carbide3d.com (verified 2026-08-09). Carbide 3D's own shop page confirms the Standard/XL/XXL work-area tiers (17.5x17.5in / 33x17.5in / 33x33in, all 4in Z) and pricing ($1,800/$2,150/$2,400). Spindle is a 65mm trim router (Carbide Compact Router, 12,000-30,000 RPM per Carbide 3D's own router spec page); Carbide 3D does not publish a wattage figure for this router on any official page, so spindle_power_w is left null rather than inferred from a third-party community estimate. Max feed rate and repeatability are likewise not published on the current product or docs pages.
Is the Carbide 3D Shapeoko 4 (Standard) worth it vs cheaper desktop cnc machines?
Carbide 3D Shapeoko 4 (Standard) against its closest cheaper and pricier desktop cnc machines on the specs that matter — every value sourced. See all 11 ranked
| Product | Price | Work area x (mm) | Work area y (mm) | Work area z (mm) | Spindle speed (rpm) | Frame material |
|---|---|---|---|---|---|---|
| Carbide 3D Shapeoko 4 (Standard) this | $1800 | 445 | 445 | 102 | 12,000-30,000 | Aluminum extrusion rails with machined aluminum X/Y carriage plates |
| Sienci LongMill MK2 (48x30) | $1799 | 1219 | 762 | — | 10,000-30,000 | Extruded aluminum rails with UHMW/HDPE wheels, lead screw drive on all axes |
| Onefinity Woodworker X-35 | $2099 | 819 | 819 | 133 | 10,000-30,000 | Anodized aluminum extrusion with cylindrical 35mm steel shaft linear rails, ball screw drive |
Frequently asked questions
How much does the Carbide 3D Shapeoko 4 (Standard) cost?
The Carbide 3D Shapeoko 4 (Standard) has a US price of $1800 (Current price on shop.carbide3d.com for the Standard config bundled with the Carbide Compact Router; XL ($2,150) and XXL ($2,400) variants cost more for larger work areas.), as of 2026-08-09.
How does the Carbide 3D Shapeoko 4 (Standard) compare on price?
At $1800, the Carbide 3D Shapeoko 4 (Standard) is #6 cheapest of the 11 desktop cnc machines we track, where the median is $1800.
When was the Carbide 3D Shapeoko 4 (Standard) released?
The Carbide 3D Shapeoko 4 (Standard) was released 2020-11-01.
What are the Carbide 3D Shapeoko 4 (Standard)'s key specs?
Carbide 3D Shapeoko 4 (Standard) (Carbide 3D): work area x mm 445, work area y mm 445, work area z mm 102, spindle speed rpm 12,000-30,000, frame material Aluminum extrusion rails with machined aluminum X/Y carriage plates. Full sourced spec sheet verified 2026-08-09.
Price of record: $1800 at shop.carbide3d.com, 2026-08-09. Other retailers may be lower — check the current price:
See Carbide 3D Shapeoko 4 (Standard) on Amazon As an Amazon Associate we earn from qualifying purchases.Similar desktop cnc machines
Nearest in price — swipe to browse. Every pick sourced and dated.
- Sienci LongMill MK2 (48x30) Sienci LongMill MK2 (48x30)
-
Snapmaker 2.0 A350 (3-in-1, CNC module) -
OpenBuilds LEAD CNC 1010 -
Onefinity Woodworker X-35 -
MillRight CNC Mega V 2 -
SainSmart Genmitsu PROVerXL 4030 -
Carbide 3D Shapeoko Pro XXL -
SainSmart Genmitsu 3018-PROVer -
Bantam Tools Desktop CNC Milling Machine -
Inventables X-Carve Pro (4x4)
All desktop cnc machines ranked · Open data & methodology · Queryable via MCP
Compare with
Head-to-head
- Carbide 3D Shapeoko 4 (Standard) vs Inventables X-Carve Pro (4x4)
- Carbide 3D Shapeoko 4 (Standard) vs Onefinity Woodworker X-35
- Carbide 3D Shapeoko 4 (Standard) vs SainSmart Genmitsu 3018-PROVer
- Carbide 3D Shapeoko 4 (Standard) vs Bantam Tools Desktop CNC Milling Machine
- Carbide 3D Shapeoko 4 (Standard) vs Sienci LongMill MK2 (48x30)
- Carbide 3D Shapeoko 4 (Standard) vs BobsCNC Evolution 4 (E4)
- Carbide 3D Shapeoko 4 (Standard) vs OpenBuilds LEAD CNC 1010