Carbide 3D · Updated August 2026
Carbide 3D Shapeoko Pro XXL: price, specs & release date
Carbide 3D Shapeoko Pro XXL, released 2022-09-01. Every price and spec below is linked to its source and dated — no guesses.
Source: shop.carbide3d.com verified verify in ledger
Is the Carbide 3D Shapeoko Pro XXL a good buy?
At $2800, the Carbide 3D Shapeoko Pro XXL is #9 cheapest of the 11 desktop cnc machines we track, where the median is $1800. On the spec sheet, its repeatability of 0.127 mm is the highest of the 6, its work area x of 838 mm is above the median of the 12, and its work area y of 838 mm is above the median of the 12. By release date, it is the newest of the 8 we date.
Specifications
| Price (US) | $2800 Current price on shop.carbide3d.com for the Pro XXL configuration. |
|---|---|
| Brand | Carbide 3D |
| Released | 2022-09-01 |
| Work area x (mm) | 838 |
| Work area y (mm) | 838 |
| Work area z (mm) | 102 |
| Spindle power (W) | — |
| Spindle speed (rpm) | 12,000-30,000 |
| Frame material | Linear rail motion system with machined aluminum plates and integrated Hybrid Table |
| Controller firmware | Carbide Motion controller board (GRBL-based firmware), USB-connected |
| Max feed rate mm min | — |
| Repeatability (mm) | 0.127 |
Source: shop.carbide3d.com (verified 2026-08-09). Carbide 3D's own product page confirms the XXL 33x33x4in work area, $2,800 price, linear-rail motion upgrade over the Shapeoko 4, and the same 65mm trim-router spindle mount (Carbide Compact Router or Makita RT0701C recommended, 12,000-30,000 RPM) - wattage is not published by Carbide 3D for this router, so spindle_power_w is left null rather than inferred. Repeatability is cited elsewhere in Carbide 3D's own marketing as approximately 0.005in (0.127mm); max feed rate is not published on the current product page.
Is the Carbide 3D Shapeoko Pro XXL worth it vs cheaper desktop cnc machines?
Carbide 3D Shapeoko Pro XXL against its closest cheaper and pricier desktop cnc machines on the specs that matter — every value sourced. See all 11 ranked
| Product | Price | Work area x (mm) | Work area y (mm) | Work area z (mm) | Spindle speed (rpm) | Frame material |
|---|---|---|---|---|---|---|
| Carbide 3D Shapeoko Pro XXL this | $2800 | 838 | 838 | 102 | 12,000-30,000 | Linear rail motion system with machined aluminum plates and integrated Hybrid Table |
| MillRight CNC Mega V 2 | $2299 | 483 | 483 | 133 | 6,000-24,000 | Steel rack-and-pinion X/Y drive with Hiwin MGN15 linear profile rails and thickened aluminum joining plates |
| Bantam Tools Desktop CNC Milling Machine | $6999 | 178 | 229 | 84 | 10,000-28,000 | Fully enclosed steel chassis with powder-coat finish |
Frequently asked questions
How much does the Carbide 3D Shapeoko Pro XXL cost?
The Carbide 3D Shapeoko Pro XXL has a US price of $2800 (Current price on shop.carbide3d.com for the Pro XXL configuration.), as of 2026-08-09.
How does the Carbide 3D Shapeoko Pro XXL compare on price?
At $2800, the Carbide 3D Shapeoko Pro XXL is #9 cheapest of the 11 desktop cnc machines we track, where the median is $1800.
When was the Carbide 3D Shapeoko Pro XXL released?
The Carbide 3D Shapeoko Pro XXL was released 2022-09-01.
What are the Carbide 3D Shapeoko Pro XXL's key specs?
Carbide 3D Shapeoko Pro XXL (Carbide 3D): work area x mm 838, work area y mm 838, work area z mm 102, spindle speed rpm 12,000-30,000, frame material Linear rail motion system with machined aluminum plates and integrated Hybrid Table. Full sourced spec sheet verified 2026-08-09.
Price of record: $2800 at shop.carbide3d.com, 2026-08-09. Other retailers may be lower — check the current price:
See Carbide 3D Shapeoko Pro XXL on Amazon As an Amazon Associate we earn from qualifying purchases.Similar desktop cnc machines
Nearest in price — swipe to browse. Every pick sourced and dated.
-
MillRight CNC Mega V 2 -
Onefinity Woodworker X-35 -
Carbide 3D Shapeoko 4 (Standard) - Sienci LongMill MK2 (48x30) Sienci LongMill MK2 (48x30)
-
Snapmaker 2.0 A350 (3-in-1, CNC module) -
OpenBuilds LEAD CNC 1010 -
SainSmart Genmitsu PROVerXL 4030 -
SainSmart Genmitsu 3018-PROVer -
Bantam Tools Desktop CNC Milling Machine -
Inventables X-Carve Pro (4x4)
All desktop cnc machines ranked · Open data & methodology · Queryable via MCP