Creality · Updated June 2026
Creality Ender-3 V3: price, specs & release date
Creality Ender-3 V3, released 2024-01. Every price and spec below is linked to its source and dated — no guesses.
Source: 3dpros.com verified ✓ corroborated verify in ledger
The Creality Ender-3 V3 is listed at $420 on 3dpros.com as of 2026-06-27, #10 cheapest of 18 3d printers (median $411); other retailers may be lower. It earns a Silver Deskmark — 51/100 pay-blind standing, #5 of 15 in class.
Verified Jun 27, 2026 · figures linked to their source in the table below
- Best for Fast print speeds (Tom's rates it Creality's fastest bed slinger); Sturdy, premium metal / die-cast frame and build quality.
- Skip if Supports only a single filament — no multicolor printing is a dealbreaker.
Price history
$420Rose from the price on record when we began tracking (2026-06-27). A dated chart builds here as the price moves over the coming days.
Is the Creality Ender-3 V3 a good buy?
At $420, the Creality Ender-3 V3 is #10 cheapest of the 18 3d printers we track, where the median is $420. On the spec sheet, its max speed mms of 600 is at the median of the 15, its max hotend temp c of 300 is at the median of the 17, and its release year of 2024 is at the median of the 16.
Evidence of Record
Our data- Independent labsmeasured it
- 2
- Physical metricsrecorded
- 3
- Outlets on recordall tested
- 2
Two independent labs measured this product across 3 physical metrics — speed, print quality and dimensional accuracy. With a second lab on record, each figure comes from more than one independent hands-on source — a measure of how much evidence exists, not a rating of the product.
Review consensus · sourced & dated
What reviewers say about the Creality Ender-3 V3
Both whitelisted testers that hands-on reviewed this exact model — Tom's Hardware and TechRadar — recommend it as a fast, well-built, affordable bed slinger with excellent print quality. Tom's Hardware measured a 14-minute-54-second Benchy and calls it Creality's fastest bed slinger; TechRadar measured a 0.176 mm average dimensional error and scored print quality 28 out of 30. Main gripes: single-filament only, bulky bed-slinger footprint, and (per Tom's) Creality's limited interface. No RTINGS/PCMag coverage found.
Based on 2 reviews · 2 lab-tested · 2024-06-18–2024-08-24
Tested by Tom's Hardware, TechRadar
Consistently praised
- Fast print speeds (Tom's rates it Creality's fastest bed slinger) · 2 sources
- Sturdy, premium metal / die-cast frame and build quality · 2 sources
- Excellent print quality with smooth surfaces and fine detail · 2 sources
- Strong value at an entry-level (~$299) price · 2 sources
- Hands-off auto bed leveling, beginner-friendly setup · 2 sources
Commonly flagged
- Supports only a single filament — no multicolor printing
- Bulky bed-slinger design takes up desk space
- Creality's touchscreen interface is limited (Tom's; TechRadar praises the same interface)
Where reviewers disagree The two testers disagree on the motion system's name: Tom's Hardware repeatedly identifies it as Core XZ (belts driving X and Z), while TechRadar repeatedly calls it Core XY. Tom's Hardware's Core XZ description is technically the more accurate one; both outlets otherwise rate the printer highly and recommend it.
The sources (2)
3DBenchy speed-boat test print time: 14 minutes and 54 seconds · Cinderwing dragon + egg print time (avg 200 mm/s, .2 layer height): six hours and 39 minutes
The Ender 3 V3 is a premium 3D printer with a well-built design and speedy motion system at an affordable price.
My only complaint is the contorted filament path, which puts the run out sensor on the back of the gantry.
The Ender 3 V3 is currently the fastest 3D bed slinger in Creality's line-up
Dimensional accuracy — X error average: 0.098 mm · Dimensional accuracy — Y error average: 0.254 mm · Print-quality benchmark score: 28 out of 30
The performance of this new machine leaves the rest of the Ender-3 and most other bed slingers looking decidedly archaic, especially when you consider the entry-level price.
the overall quality is impressive, with the surface smoothly finished and fine detail well presented
While the single filament limitation and space requirements of the bedslinger design might be drawbacks
Specifications
| Price (US) | $420 Launch/published MSRP ~$389-425; current street price may vary |
|---|---|
| Brand | Creality |
| Released | 2024-01 |
| Technology | FDM |
| Build volume (mm) | 220 x 220 x 250 mm |
| Max speed mms | 600 |
| Auto leveling | Yes |
| Multicolor | No |
| Enclosed | No |
| Max hotend temp c | 300 |
Source: 3dpros.com (verified 2026-06-27) · corroborated by tomshardware.com. Full Ender-3 V3 (CoreXZ variant, distinct from SE/KE). Build volume 220x220x250 mm, max speed 600 mm/s, hotend 300C, load-cell auto-leveling confirmed via 3DPros and Tom's Hardware. Released January/February 2024 with CoreXZ motion, Klipper firmware, direct drive. priceUsd adjusted 420->399 toward the commonly published Creality store MSRP (cited 3DPros lists $400-425). Open frame, no enclosure.
Is the Creality Ender-3 V3 worth it vs cheaper 3d printers?
Creality Ender-3 V3 against its closest cheaper and pricier 3d printers on the specs that matter — every value sourced. See all 18 ranked
| Product | Price | Technology | Build volume (mm) | Max speed mms | Auto leveling | Multicolor |
|---|---|---|---|---|---|---|
| Creality Ender-3 V3 this | $420 | FDM | 220 x 220 x 250 mm | 600 | Yes | No |
| Anycubic Kobra S1 | $401 | FDM | 250 x 250 x 250 mm | 600 | Yes | No |
| Sovol SV08 | $549 | FDM | 350 x 350 x 345 mm | 700 | Yes | No |
Frequently asked questions
What do reviewers say about the Creality Ender-3 V3?
Both whitelisted testers that hands-on reviewed this exact model — Tom's Hardware and TechRadar — recommend it as a fast, well-built, affordable bed slinger with excellent print quality. Tom's Hardware measured a 14-minute-54-second Benchy and calls it Creality's fastest bed slinger; TechRadar measured a 0.176 mm average dimensional error and scored print quality 28 out of 30. Main gripes: single-filament only, bulky bed-slinger footprint, and (per Tom's) Creality's limited interface. No RTINGS/PCMag coverage found. Praised: Fast print speeds (Tom's rates it Creality's fastest bed slinger); Sturdy, premium metal / die-cast frame and build quality; Excellent print quality with smooth surfaces and fine detail; Strong value at an entry-level (~$299) price; Hands-off auto bed leveling, beginner-friendly setup. Flagged: Supports only a single filament — no multicolor printing; Bulky bed-slinger design takes up desk space; Creality's touchscreen interface is limited (Tom's; TechRadar praises the same interface). (From 2 tester reviews, 2 lab-tested.)
How much does the Creality Ender-3 V3 cost?
The Creality Ender-3 V3 has a US price of $420 (Launch/published MSRP ~$389-425; current street price may vary), as of 2026-06-27.
How does the Creality Ender-3 V3 compare on price?
At $420, the Creality Ender-3 V3 is #10 cheapest of the 18 3d printers we track, where the median is $420.
Has the Creality Ender-3 V3's price changed?
No — the Creality Ender-3 V3 has held at $420 since 2026-06-27.
What is the lowest price the Creality Ender-3 V3 has been?
The lowest we have recorded for the Creality Ender-3 V3 is $420 on 2026-06-27.
Is now a good time to buy the Creality Ender-3 V3?
The Creality Ender-3 V3 is currently $420; the lowest we have recorded is $420 (2026-06-27). Every price is dated, so you can judge it against its own history.
When was the Creality Ender-3 V3 released?
The Creality Ender-3 V3 was released 2024-01.
What are the Creality Ender-3 V3's key specs?
Creality Ender-3 V3 (Creality): technology FDM, build volume mm 220 x 220 x 250 mm, max speed mms 600, auto leveling Yes, multicolor No. Full sourced spec sheet verified 2026-06-27.
Price of record: $420 at 3dpros.com, 2026-06-27. Other retailers may be lower — check the current price:
See Creality Ender-3 V3 on Amazon As an Amazon Associate we earn from qualifying purchases.Similar 3d printers
Nearest in price — swipe to browse. Every pick sourced and dated.
All 3d printers ranked · Open data & methodology · Queryable via MCP
Compare with
Cheaper 3d printers
- Anycubic Kobra S1 $401
- Bambu Lab A1 $399
- Elegoo Saturn 4 Ultra $399
- Creality K1 $389
- Anycubic Kobra 3 $349
- Elegoo Centauri Carbon $309
Step up
- Sovol SV08 $549
- Creality K1C $559
- Bambu Lab P1S $699
- Prusa MK4S $999
- Bambu Lab X1-Carbon $1199
- Prusa CORE One $1299
More from Creality
- Creality K1 $389
- Creality K1C $559