Prusa Research · Updated August 2026
Prusa XL: price & specs
Prusa XL. Every price and spec below is linked to its source and dated — no guesses.
Source: prusa3d.com verified ✓ corroborated verify in ledger
- Best for Waste-free multi-material/multicolor printing via dedicated per-spool toolheads; High dimensional accuracy and overall print quality.
- Skip if Expensive, especially $3,999 for the assembled 5-toolhead configuration is a dealbreaker.
Price history
$2080.5Is the Prusa XL a good buy?
At $2081, the Prusa XL is the most expensive of the 18 3d printers we track, where the median is $420. On the spec sheet, its max hotend temp c of 290 is the lowest of the 17.
Evidence of Record
Our data- Independent labsmeasured it
- 2
- Physical metricsrecorded
- 3
- Outlets on recordall tested
- 2
Two independent labs measured this product across 3 physical metrics — speed, print quality and dimensional accuracy. With a second lab on record, each figure comes from more than one independent hands-on source — a measure of how much evidence exists, not a rating of the product.
Review consensus · sourced & dated
What reviewers say about the Prusa XL
Both whitelisted testers ran hands-on, multi-week reviews of the exact five-toolhead Original Prusa XL: Tom's Hardware (published 2024-03-14) over its testing period and TechRadar (2024-05-28) across a two-month test. Every quote and measured value in both sources was verified as present in the fetched article text. Both rate the XL near the top of FFF printers, praising waste-free multi-material printing, dimensional accuracy and the large 360x360x360mm build volume; both flag the steep price and lengthy multi-toolhead setup, while Tom's Hardware additionally frames it as quality-over-speed.
Based on 2 reviews · 2 lab-tested · 2024-03-14–2024-05-28
Tested by Tom's Hardware, TechRadar
Consistently praised
- Waste-free multi-material/multicolor printing via dedicated per-spool toolheads · 2 sources
- High dimensional accuracy and overall print quality · 2 sources
- Large 360x360x360mm build volume / scale · 2 sources
- Cleaner, less messy multi-material than AMS-style competitors · 2 sources
Commonly flagged
- Expensive, especially $3,999 for the assembled 5-toolhead configuration · 2 sources
- Time-consuming multi-toolhead setup and calibration (several hours to ~1 hour+) · 2 sources
- Quality-over-speed; not fast (25:14 Speed Benchy)
- No enclosure available at launch
Where reviewers disagree The two testers weight speed differently: Tom's Hardware frames the XL as deliberately quality-over-speed and says it 'won't top our list of the fastest 3D printers' (25:14 Speed Benchy), whereas TechRadar repeatedly describes its CoreXY prints as 'fast' and states it is 'unmatched in terms of accuracy and speed in its category.'
The sources (2)
Speed Benchy print time: 25 min 14 sec · Four-color dragon print time: 13 hr 51 min · Same 4-color print vs Bambu Lab P1P: 8 hr faster on XL; P1P wasted 70 g filament · Prusa toolbox (PLA/PETG/TPU) print time: 14 hr 45 min
The Prusa Original XL is a feat of engineering and one of the best 3D printers we've ever tested.
The only downside to the Prusa XL is the price, which is a hefty $3,999 when fully loaded with 5 tools heads and shipped assembled.
Sadly, the Prusa XL won't top our list of the fastest 3D printers with its 25 minute and 14 second Benchy.
Dimensional accuracy X error (avg): 0.08 mm · Dimensional accuracy Y error (avg): 0.108 mm · Dimensional accuracy X&Y error (avg): 0.094 mm · TechRadar print-quality test score: 30/30
delivering fast and the most accurate prints we've yet seen from a FFF printer
The precision of the multifilament head changer operates smoothly, avoiding the mess typical of other competitor multi-material machines.
the fittings may not feel robust over time, raising concerns about long-term reliability
Specifications
| Price (US) | $2080.5 — current on record (was $2190) |
|---|---|
| Brand | Prusa Research |
| Released | — |
| Technology | FDM |
| Build volume (mm) | 360 x 360 x 360 mm |
| Max speed mms | — |
| Auto leveling | Yes |
| Multicolor | No |
| Enclosed | No |
| Max hotend temp c | 290 |
Source: prusa3d.com (verified 2026-07-07) · corroborated by printedsolid.com. Re-fetched both URLs via fetch-clean.mjs and verified every non-null field verbatim. Exact model confirmed as the single-toolhead Prusa XL on BOTH pages (Prusa3D: "Original Prusa XL Single-toolhead 3D Printer"; Printed Solid: "Semi Assembled 1 Toolhead $2,190") — no variant/capacity mismatch. Verified: Build Volume "360×360×360 mm" (both pages); Max Nozzle Temperature "290 °C / 554 °F" (both); bed calibration "Automatic, Mesh Bed Leveling" / "Fully automatic Mesh Bed Leveling via Loadcell sensor" → auto_leveling=true; "Chamber: No (optional Enclosure as a separate add-on)" / "Enclosure / Chamber: Optional add-on" → enclosed=false; US price "$2,190.00" and "Semi Assembled 1 Toolhead $2,190" (Printed Solid). technology="FDM" supported — the corroboration page explicitly calls it an "FFF printer" (TechRadar) and the machine is unambiguously fused-filament (1.75 mm filament, Nextruder direct-drive extruder, nozzle, heatbed); FDM is the standard synonym for FFF. multicolor=false because the priced base is the single-toolhead unit, which both pages state requires separately purchased toolhead upgrades ("Start with a single-tool machine and then expand it to 2 or 5 toolheads") — consistent with dataset methodology. max_speed_mms=null (neither page publishes a mm/s speed rating). release_year=null and releaseDate=null (neither page states an explicit numeric release year; "the 2025 iteration" describes the current version, not the original release). All 6 non-null specs plus priceUsd verified against fetched text; nothing required nulling.
Is the Prusa XL worth it vs cheaper 3d printers?
Prusa XL against its closest cheaper and pricier 3d printers on the specs that matter — every value sourced. See all 18 ranked
| Product | Price | Technology | Build volume (mm) | Auto leveling | Multicolor | Enclosed |
|---|---|---|---|---|---|---|
| Prusa XL this | $2080.5 | FDM | 360 x 360 x 360 mm | Yes | No | No |
| Bambu Lab H2D | $1899 | FDM | 350 x 320 x 325 mm | Yes | Yes | Yes |
Frequently asked questions
What do reviewers say about the Prusa XL?
Both whitelisted testers ran hands-on, multi-week reviews of the exact five-toolhead Original Prusa XL: Tom's Hardware (published 2024-03-14) over its testing period and TechRadar (2024-05-28) across a two-month test. Every quote and measured value in both sources was verified as present in the fetched article text. Both rate the XL near the top of FFF printers, praising waste-free multi-material printing, dimensional accuracy and the large 360x360x360mm build volume; both flag the steep price and lengthy multi-toolhead setup, while Tom's Hardware additionally frames it as quality-over-speed. Praised: Waste-free multi-material/multicolor printing via dedicated per-spool toolheads; High dimensional accuracy and overall print quality; Large 360x360x360mm build volume / scale; Cleaner, less messy multi-material than AMS-style competitors. Flagged: Expensive, especially $3,999 for the assembled 5-toolhead configuration; Time-consuming multi-toolhead setup and calibration (several hours to ~1 hour+); Quality-over-speed; not fast (25:14 Speed Benchy); No enclosure available at launch; Toolhead mounts may not feel robust over time (long-term reliability); Early-batch units shipped with tuning/quality issues. (From 2 tester reviews, 2 lab-tested.)
How much does the Prusa XL cost?
The Prusa XL has a US price of $2080.5, as of 2026-08-18.
How does the Prusa XL compare on price?
At $2081, the Prusa XL is the most expensive of the 18 3d printers we track, where the median is $420.
Has the Prusa XL's price dropped?
Yes — since 2026-07-25 the Prusa XL has fallen 5%, from $2190 to $2080.5.
What is the lowest price the Prusa XL has been?
The lowest we have recorded for the Prusa XL is $2080.5 on 2026-08-18 — which is its current price.
Is now a good time to buy the Prusa XL?
At $2080.5, the Prusa XL is at the lowest price we have recorded since 2026-07-25.
What are the Prusa XL's key specs?
Prusa XL (Prusa Research): technology FDM, build volume mm 360 x 360 x 360 mm, auto leveling Yes, multicolor No, enclosed No. Full sourced spec sheet verified 2026-07-07.
Price of record: $2080.5 at prusa3d.com, 2026-08-18. Other retailers may be lower — check the current price:
See Prusa XL on Amazon As an Amazon Associate we earn from qualifying purchases.Similar 3d printers
Nearest in price — swipe to browse. Every pick sourced and dated.
All 3d printers ranked · Open data & methodology · Queryable via MCP
Compare with
Cheaper 3d printers
- Bambu Lab H2D $1899
- Prusa CORE One $1299
- Bambu Lab X1-Carbon $1199
- Prusa MK4S $999
- Bambu Lab P1S $699
- Creality K1C $559
More from Prusa Research
- Prusa MK4S $999
- Prusa CORE One $1299