Bosch · Updated July 2026
Bosch GET75-6N: price & specs
The Bosch GET75-6N costs $339, #7 cheapest of 8 random orbital sanders (median $112). It earns a Bronze Deskmark — 22/100 pay-blind standing, #7 of 8 in class.
Verified Jul 11, 2026 · figures linked to their source in the table below
- Best for Robust dual-mode performance, with Turbo mode rated for 3X faster stock removal than standard random orbit; Maintains a constant speed under load so pressure changes do not bog it down.
- Skip if Reviewer withholds a verdict on whether Turbo mode can actually replace a belt sander is a dealbreaker.
Bosch GET75-6N. Every price and spec below is linked to its source and dated — no guesses.
Source: boschtools.com verified ✓ corroborated verify in ledger
Is the Bosch GET75-6N a good buy?
At $339, the Bosch GET75-6N is #7 cheapest of the 8 random orbital sanders we track, where the median is $112. On the spec sheet, its pad diameter of 6 in is the highest of the 9, its oscillations per minute max of 7300 is the lowest of the 9, and its amperage of 7.5 is the highest of the 7.
Evidence of Record
Our dataNo independent lab has measured this product yet. 1 outlet has it on record by mention only, with no hands-on measurements published to weigh its claims against — a gap in the evidence, not a verdict on the product.
Review consensus · sourced & dated
What reviewers say about the Bosch GET75-6N
Only one whitelisted tester covers the Bosch GET75-6N: Pro Tool Reviews, and its December 2019 piece is a hands-off preview, not a lab test, so there are no measured results. It praises the robust dual-mode Turbo removal, constant speed under load, and sub-Makita/Festool pricing, but defers judgment on whether Turbo truly replaces a belt sander. Non-whitelisted blogs were excluded.
Tested by Pro Tool Reviews
Consistently praised
- Robust dual-mode performance, with Turbo mode rated for 3X faster stock removal than standard random orbit
- Maintains a constant speed under load so pressure changes do not bog it down
- Priced a little below Makita and well below Festool for the 6-inch model
Commonly flagged
- Reviewer withholds a verdict on whether Turbo mode can actually replace a belt sander
- New model's gain mainly closes the gap to the tool's own Turbo mode rather than leaping past rivals
Where reviewers disagree No cross-source comparison is possible: the single whitelisted source is a preview, not a hands-on test, so no whitelisted lab has independently measured this model's stock-removal rate, vibration, or dust collection.
The sources (1)
Bosch Dual-Mode Random Orbit Sanders have a pretty robust performance package that ought to help you smooth out those rough edges quickly when you need to and keep things under control for when you need that finer finish.
That's a little less than what we're seeing Makita's prices at and unsurprisingly quite a bit less than Festool.
What we'll be waiting to see is whether we're talking about a supplementary replacement or a full replacement.
Specifications
| Price (US) | $339 Ohio Power Tool (corroboration) lists this exact model (OPT SKU / MPN GET75-6N) at "Special Price $339.00" (regular "was $389.00"), both figures verbatim on the page. The Bosch manufacturer page shows no price; the Amazon listing was priced in EUR (Price EUR 270.67, List Price EUR 340.74), so it was not used for the USD figure. |
|---|---|
| Brand | Bosch |
| Released | — |
| Power source | corded |
| Pad diameter (in) | 6 |
| Orbit diameter (mm) | — |
| Oscillations per minute max | 7300 |
| Variable speed | Yes |
| Amperage | 7.5 |
| Voltage | — |
| Dust collection type | vacuum-port |
| Weight (lb) | 5.7 |
| Vibration ms2 | — |
| Noise level (dB) | — |
Source: boschtools.com (verified 2026-07-11) · corroborated by ohiopowertool.com. The Bosch manufacturer page (source) confirmed the exact model as "GET75-6N Professional", part number 0601257110, a 6 In. Dual-Mode Random Orbit Sander, and its technical-data table stated verbatim: Amperage 7.5, No Load OPM 3,300 - 7,300, Orbit Radius 0.18" (4.5 mm), Rating/Voltage 120 V, Variable Speed Yes, Weight 5.7 lb, and a built-in dust port for vacuum hoses (no bag); it listed no price. Ohio Power Tool (corroboration) confirmed the same model (OPT SKU / MPN GET75-6N, "Bosch 6\" Dual-Mode Random Orbit Sander GET75-6N") and provided the USD price of $339.00 (regular $389.00). Amazon independently corroborated the 7.5 Amp / 5.7 lb / 3,300-7,300 OPM specs but was priced in EUR, so it was not used for the USD price. orbitDiameterMm is left null because only the orbit radius (4.5 mm) was disclosed, not the oscillation diameter; vibration and noise figures were not disclosed on any fetched page.
Is the Bosch GET75-6N worth it vs cheaper random orbital sanders?
Bosch GET75-6N against its closest cheaper and pricier random orbital sanders on the specs that matter — every value sourced. See all 8 ranked →
| Product | Price | Power source | Pad diameter (in) | Oscillations per minute max | Variable speed | Amperage |
|---|---|---|---|---|---|---|
| Bosch GET75-6N this | $339 | corded | 6 | 7300 | Yes | 7.5 |
| Makita BO5041K | $149 | corded | 5 | 12000 | Yes | 3 |
| Festool ETS EC 150/5 EQ | $649 | corded | 6 | 10000 | Yes | — |
Frequently asked questions
What do reviewers say about the Bosch GET75-6N?
Only one whitelisted tester covers the Bosch GET75-6N: Pro Tool Reviews, and its December 2019 piece is a hands-off preview, not a lab test, so there are no measured results. It praises the robust dual-mode Turbo removal, constant speed under load, and sub-Makita/Festool pricing, but defers judgment on whether Turbo truly replaces a belt sander. Non-whitelisted blogs were excluded. Praised: Robust dual-mode performance, with Turbo mode rated for 3X faster stock removal than standard random orbit; Maintains a constant speed under load so pressure changes do not bog it down; Priced a little below Makita and well below Festool for the 6-inch model. Flagged: Reviewer withholds a verdict on whether Turbo mode can actually replace a belt sander; New model's gain mainly closes the gap to the tool's own Turbo mode rather than leaping past rivals. (From 1 tester review.)
How much does the Bosch GET75-6N cost?
The Bosch GET75-6N has a US price of $339 (Ohio Power Tool (corroboration) lists this exact model (OPT SKU / MPN GET75-6N) at "Special Price $339.00" (regular "was $389.00"), both figures verbatim on the page. The Bosch manufacturer page shows no price; the Amazon listing was priced in EUR (Price EUR 270.67, List Price EUR 340.74), so it was not used for the USD figure.), as of 2026-07-11.
How does the Bosch GET75-6N compare on price?
At $339, the Bosch GET75-6N is #7 cheapest of the 8 random orbital sanders we track, where the median is $112.
What are the Bosch GET75-6N's key specs?
Bosch GET75-6N (Bosch): powerSource corded, padDiameterIn 6, oscillationsPerMinuteMax 7300, variableSpeed Yes, amperage 7.5. Full sourced spec sheet verified 2026-07-11.
Similar random orbital sanders
Nearest in price — swipe to browse. Every pick sourced and dated.
All random orbital sanders ranked → · Open data & methodology · Queryable via MCP